Transmission of self-priming pump impeller with severe liquid corrosiveness is severely corroded

The self-priming pump does not absorb water, so the end of the outlet pipe is not water. Some users know that the self-priming pump cannot be reached. Therefore, the ball valve and the pressure gauge and pressure gauge should be installed between the pump outlet and the ball valve. To facilitate observation of the outlet pressure to determine if it has been inhaled.

The corrosion of the self-priming pump impeller with severe liquid corrosivity is severely corroded. It is recommended to use a corrosion-resistant self-priming pump product such as a stainless steel self-priming pump or a fluoroplastic self-priming pump, or a long-term use between the self-pump impeller wear impeller and the pump cover. The gap between the self-priming pumps and the gap between the self-priming pumps cannot reach the recommended cause, replacing the new self-priming pump impeller.

The suction port is provided with a check film. The pump chamber is provided with a liquid storage chamber and a gas-liquid separation chamber. The rotation of the impeller can be automatically emptied and emptied. When the medium is inhaled, the liquid can last for 15 minutes. The liquid can continue to be delivered, the machine does not require additional cooling water to cool, the operation is convenient, there is no leakage safety, and the liquid pump replaces the good product.

https://www.chinakuta.com/