Teach you how to install a deep well pump

The deep well pump should be filled with water before it is installed in the well. It is not necessary to put the pump on the ground to add water during the process of adding water. It is not correct to add water to the pump because the water is not full, no matter how big the pump is. Be sure to erect the pump vertically and fill the pump with water.
Before you put it into the water, you need to jog it to see if the deep well pump wiring is reversed. Is the deep well pump reversed?
In terms of how the deep well pump should be fixed, there are still many people who do not know how to fix the deep well pump. In fact, the method of fixing the deep well pump is very simple. First, the outlet steel pipe is connected with the pump outlet and then the deep well pump is suspended by the wire rope and slowly descends toward the bottom of the well. Then, the joint of the steel pipe is gradually lowered, and the deep well pump is controlled within a range of about 1 meter from the bottom of the pool. Then, the outlet steel pipe is fixed at the wellhead so that the outlet pipe and the wire rope can be subjected to the gravity of the pump.

https://www.chinakuta.com/