How to prevent self-priming pump aging?

Update: 06-09-2019

The highlight of the self-priming pump is that it integ […]

The highlight of the self-priming pump is that it integrates strong self-priming and non-blocking sewage discharge into one. It adopts axial recirculation mixing and adopts the unique design of pump body and impeller passage. It does not need to install bottom valve and irrigation and diversion water. It can not only suck clean water and chemical medium like the general self-priming pump, but also suck and drain waste containing large particles and long fibers. All engineering wastewater and colloids, such as dirt, sediment, waste mineral impurities, can completely reduce the labor intensity of workers. The pump is easy to use, move and install, with little maintenance and stable performance. Its self-priming height is 5 meters. It is an ideal pump to replace all kinds of submersible and submerged sewage pumps.

Compared with similar domestic products, self-priming pump has the characteristics of simple structure, good self-priming performance, strong sewage discharge capacity, high efficiency and energy saving, easy use and maintenance, and is a pioneer in the sewage pump series products in China. Various performance indicators are stable, reaching the international level, and have broad application market and development prospects.

First, in order to prevent the aging of the self-priming pump, we need to check the motor of the self-priming pump frequently, especially whether its gear can rotate, and whether its power is the same as when it was purchased. For its inspection is not to look at the naked eye, but need a certain equipment to test.

Secondly, the quality of the self-priming pump has been affected by the motor. When the power of the motor is too low, the amount of water can be extracted is less. When testing, the quality of the coil of the motor in the self-priming pump must be identified, which is very important for the normal operation of the self-priming pump.

Thirdly, it is also an important point. Must check the intake valve in the self-priming pump, this part directly affects whether the self-priming pump can pump out water.

The above is a daily maintenance method to prevent the aging of self-priming pump.